High Line Stone Care

PREPARED FOR SAL & FEDRA

Your kitchen design review.

Project feasibility concepts prepared for Sal and Fedra.

Download the presentation (PDF)
Opening the kitchen…
Option 1, light gray countertops in the approved L-shaped kitchen, with the sink to the right of the door
Pinch to zoom · Drag when enlarged
Countertop edge

Standard 3 cm slab; approximately 1¼ inch.

Option 01 · Light gray

A cloudy pale gray with gentle, subtle darker movement. Polished, with a simple eased edge.

The stove wall turns 90° to the wall with the exterior door. The sink counter sits immediately to the right of the door. Your existing wood floor stays.

CABINET DETAILS

Two new left end panels

Replace the existing exposed side treatment at the left end of the cooking run. Match both new panels to the cabinet door profiles and approved warm brown stain.

Proposed new upper left and lower left cabinet end panels, matching warm brown stain and new satin nickel cabinet hardware

Proposed detail with new end panels and satin nickel hardware. Final panel profile, knob style and finish are subject to your approval.

Upper left cabinet

Fit a new decorative end panel to the exposed left side of the upper cabinet.

Lower left cabinet

Fit a new decorative end panel below the countertop, with a finished edge and toe-kick detail.

Cabinet hardware

Replace all cabinet door knobs. Coordinate the drawer pulls with the selected finish.

Trash pullout and hinges

Repair and adjust the existing trash pullout. Inspect all door hinges and confirm the extent of compatible replacements before the proposal.

ONE MORE WAY TO FINISH THE ROOM

Two backsplash treatments

Choose the lower backsplash or carry the same green tile around the window. Both treatments can be paired with any of the three gray countertop choices.

Both previews show Option 01 light gray with the standard edge. The extra window tile is an optional treatment for your proposal.

THE DETAILS YOU ASKED FOR

Your requested changes

All three color options share this proposed scope. Final dimensions and hardware selections will be confirmed before the proposal.

  1. 01

    Gray countertops

    Replace the counters with a polished gray surface. Choose a nominal 1¼-inch edge (3 cm slab) or a 2-inch built-up edge, subject to fabrication confirmation.

  2. 02

    The green backsplash from your inspiration

    Small, glossy green square tiles with natural shade variation and a handmade texture, following the sample photo’s style. Optionally extend the tile around and above the window.

  3. 03

    New left end panels and warm brown stain

    Install two new decorative end panels: one on the upper left cabinet and one on the lower left cabinet. Match them to the stained doors and frames. Keep the existing cabinet door profiles.

  4. 04

    A Wolf stove and a real metal hood

    Replace the center wooden hood enclosure with an exposed stainless hood over a new Wolf stove. The concept uses a 36-inch stove and 42-inch hood in the reported appliance space.

  5. 05

    The wood beside the backsplash stays

    Keep both narrow wooden display and spice niches beside the stove and stain them to match the cabinets.

  6. 06

    Flat, clear cabinet glass

    Replace the beveled glass in the paired upper doors with plain, clear panes. Preserve the surrounding wood door frames.

  7. 07

    A smooth sink edge and a new faucet

    A new stainless undermount sink keeps the countertop free of a raised sink rim. The concept shows two bowls and a matching high-arc pull-down faucet.

  8. 08

    Your existing wood floor stays

    Keep the current wood flooring, its brown color, plank widths and direction. Flooring replacement or restaining is not part of this design.

  9. 09

    New cabinet door knobs

    Replace all cabinet door knobs and confirm the style and finish with you. Coordinate drawer pulls with the chosen hardware and existing fixing holes.

  10. 10

    A working trash pullout

    Repair the existing trash rack and pullout assembly. Check the runners, fixings and door alignment, and confirm any replacement mechanism after inspection.

  11. 11

    Door hinge review

    Inspect all cabinet door hinges for alignment, wear and closing action. Review full hinge replacement, including soft-close where compatible, and confirm the final scope before the proposal.

Your feedback and next steps

Let us know your preferred gray, countertop edge, backsplash height and cabinet hardware. We are confirming the selected stone thickness, fabrication details and supplier pricing before preparing the proposal. Please share any questions or changes you would like us to consider.

Project feasibility and design concepts, subject to field measurements and final selections. “Realistic views” shows the room renderings with pan and zoom. The dedicated cabinet detail shows the new left end panels and proposed hardware; the full-room views show the overall finish direction. “Rotate layout” is an approximate 3D model of the room; it is not a photographic scan or construction drawing. A 2-inch edge is a proposed fabricated detail; availability and cost require confirmation. On-screen colors and patterns are approximate; approve physical samples and the actual slab. Final appliance fit, ventilation and sink cutout details are confirmed before ordering or fabrication.

Backsplash preview